Overflow valves independent from back pressure, spring loaded.
UVU Overflow Valves
AWP’s overflow valves are designed to be useed as relief valves in the refrigerant circulation of industrial refrigerating plants. Overflow valves are safety devices for protecting the refrigerating system or its components from excess pressure (see also DIN 8975 part 7). They open independently from back pressure and close completely within a pressure drop of 10 % below the set reponse pressure. They comply with the technical regulations of the German Technical Control Board (TÜV).
Technical Features
- Available in steel or stainless steel
- Selection of body material as per German DIN EN12284, AD2000 Series W
- Working mediums: refrigerants as per EN 378 p. 1, e. g. NH3, R134a, R290 (propane), R507 and blends with refrigerator oil; neutral, gaseous and liquid mediums, glycol-based cold brine
- Installation position: vertical and horizontal
-
Available valve seat seals:
UVUA: PTFE seal, can be used at temperatures of -60 °C to +180 °C
UVUB: elastomer seal, can be used at temperatures of -50 °C to +110 °C
Technical Specification
Design
angle type
Material
steel or stainless steel
Nominal Size
DN 10-32
Nominal Pressure Level
PS 25, PS 40, PS 63
Temperature Range for Standard Valves
UVUA: -60 °C to +180 °C
UVUB: -50 °C to +110 °C
Temperature Range for HT Valve Series
-10 °C to +200 °C
Connections
butt welding and flanged ends as per DIN and ANSI, brazed ends, threaded ends
Response Pressure Range
4-63 bar
Where to find us
- GEA AWP GmbH Armaturenstr. 2 17291 Prenzlau Germany
- Fax: +49 3984 8559 18
- E-mail: info@awpvalves.com
- Phone: +49 3984 8559 0
