HRAR regulating valves are designed to regulate the medium flow with a cone on the underside of the valve disc. The stem sealing is provided by a threaded bush.
HRAR Regulating Valves
AWP regulating valves are designed for installation in industrial heating and refrigeration systems. Actuation is by hand wheel or ratched. These valves are both regulating and shut-off valves. Rotating the stem clockwise will lower the valve disc onto the valve seat and therefore close the pipe, counter-clockwise rotation will lift the valve disc and open the pipe. The regulating function is enabled by a cone on the underside of the valve disc. The maximum diameter of the cone corresponds to the valve’s nominal diameter. The stem sealing is provided by a threaded bush with spring-elastic PTFE ring. The valves are also equipped with a back seal so that when the valve is fully opened it is possible to replace the threaded bush and the seal.
Technical Features
- Available in steel or stainless steel
- Selection of body material as per German DIN EN12284, AD2000 Series W
- Working mediums: refrigerants as per EN 378 p. 1, e. g. NH3, R22, R134a and blends with refrigerator oil; neutral, gaseous and liquid mediums; glycol-based cold brine
- Installation is possible in any position but the flow direction must be observed
Technical Specification
Design
straightway or angel type
Material
steel or stainless steel
Nominal Size
DN 6-250
Nominal Pressure Level
PS 25, PS 40, PS 63, PS 160
Temperature Range for Standard Valves
-60 °C to +150 °C
Temperature Range for HT Valve Series
-10 °C to +200 °
Connections
butt welding and flanged ends as per DIN and ANSI, brazed ends, threaded ends
Additional Information
available with cover extension
Where to find us
- GEA AWP GmbH Armaturenstr. 2 17291 Prenzlau Germany
- Fax: +49 3984 8559 18
- E-mail: info@awpvalves.com
- Phone: +49 3984 8559 0
